Starlink Mini 12V to 30V Step Up Voltage Booster Power Supply with Cigerette Plug

12 Volt Direct – 12V to 30V DC Step-Up Converter for Starlink Mini

Power your Starlink Mini reliably from any 12V vehicle, caravan, or battery setup with the 12 Volt Direct DC-DC Step-Up Converter.

This compact and rugged converter has been custom pre-configured to output a stable 30V DC, ensuring your Starlink Mini gets the voltage it needs — even when voltage drop becomes an issue.

 

---

Why This Converter is Essential

Starlink Mini requires a minimum of 12V to operate, but many 12V systems can dip below that under load. Long cable runs, battery sag, or standard vehicle wiring can all cause voltage drop, leading to instability or shutdowns.

Even a small drop below 12V — caused by poor connections, cold weather, or high draw — can prevent the dish from powering up correctly. This converter solves that problem by stepping up your 12V input to a consistent 30V output, providing clean and reliable power no matter the conditions.

 

---

Key Features

• Input Voltage: 9–15V DC (works with all standard 12V systems)

• Output Voltage: Regulated 30V DC / 3A (90W max), pre-set for Starlink Mini

• Efficiency: ≥92% at full load for maximum performance with minimal heat

• Built-in Protections: Over-current, reverse polarity, short circuit, and thermal shutdown

• Construction:

  • Die-cast aluminium housing for passive cooling

  • Sealed design for use in harsh environments

  • Compact 60mm x 60mm footprint

 

---

Included with the Converter:

• 12V cigarette lighter plug with inline 10A fuse

• Pre-wired output barrel socket compatible with Starlink Mini DC cables

• Plug-and-play simplicity — no need for soldering or configuration.

 

---

Ideal For:

• Off-grid caravans & camper trailers

• 4WD touring setups

• Marine and mobile internet systems

• Anyone powering Starlink Mini from a 12V battery

 

---

How to Install:

1. Plug into any 12V accessory socket or hardwire via Anderson plug.

2. Mount the converter on a flat surface using screws or adhesive tape.

3. Connect your Starlink Mini using the original DC cable.

4. You're online — without the worry of voltage drop.

 

---

Keep your Starlink Mini connected — no matter the voltage on your 12V line.

Exclusively from 12 Volt Direct — Built for Australian conditions.