Starlink V5 12V/24V DC Power Adapter - Dual Port Gigabit PoE with Cigarette Plug and XT60 Lead
Brand: 12 Volt Direct
Part number: TVD-SL77
DETAILS
Overview
Run your Starlink V5 from 12V or 24V
This dual port PoE adapter replaces the 240V Starlink power supply box. It takes 12V or 24V DC from your battery and sends 54V PoE power and gigabit data to the dish and the router through two Starlink ports.
It suits the Starlink V5, and Starlink kits with the Router Mini or Router 4. No inverter needed, so it is ideal for caravans, 4WDs and off-grid systems.

Check your router first
Which 12V adapter suits my Starlink?
Starlink kits power the dish in two different ways, so the right adapter depends on your router, not the dish.
- ✓Starlink Router 3 (wide router with a round power socket, power supply plugs into the router): use the TVD-SL34 12V to 57V booster.
- ✓Router Mini or Router 4 (separate power supply box with two Starlink ports), and the Starlink V5: use the TVD-SL77 dual port PoE adapter (this product).
Not sure? Send us a photo of your router and power supply and we will tell you which one you need.

Two ports, one box
Powers the dish and the router
One Starlink port runs to the dish and the other runs to the router, just like the original power supply box. Each port has its own PoE ON/OFF switch.
- ✓Two Starlink (SPX) PoE ports, 10/100/1000 Mbps
- ✓Independent PoE ON/OFF switch on each port
- ✓Turn PoE OFF on a port when connecting a third-party router
- ✓Input reverse polarity and overcurrent protection
- ✓PoE output overcurrent protection

Compatibility
- ✓Starlink V5
- ✓Starlink kits with the Router Mini
- ✓Starlink V4 with Router 4
- ✓12V or 24V DC systems
Not suitable for
- ✕Starlink Router 3 kits: use the TVD-SL34
- ✕Starlink Mini dish: see our Starlink Mini 12V booster
Tech specs
| Supplier model | EP-SK0188 |
| Input voltage | 12–24V DC |
| Input connector | XT60 |
| PoE output | 2 x Starlink (SPX) ports, 54V DC |
| Output power | 130W max combined |
| Data rate | 10/100/1000 Mbps |
| PoE switch | Independent ON/OFF per port |
| Pin layout | +V pins 1, 2, 3, 6 / −V pins 4, 5, 7, 8 |
| Input lead | 1m 14AWG cigarette plug to XT60 |
| Indicator | Blue LED |
| Operating temperature | −20 to +55°C, 10–90% RH |
| Storage temperature | −40 to +70°C |
| Warranty | 12 months |
What's included
- ✓1 x Starlink V5 12V/24V dual port PoE adapter
- ✓1 x 1m cigarette plug to XT60 input lead
Install
Unplug the Starlink power supply box from the dish and router cables.
Plug the dish cable and the router cable into the two Starlink ports.
Connect the XT60 input to your 12V or 24V supply. Leave PoE ON for Starlink routers.

Goes well with
Prefer an Anderson outlet? Add our Anderson to XT60 lead in place of the cigarette plug lead. Need a longer run? Our Starlink Gen 3 cables use the same Starlink plug, so they fit the Starlink V5 dish and both ports on this adapter.
TVDA31 · Run it from an Anderson outlet instead of the cigarette plug lead
Frequently asked questions
Will my Starlink Gen 3 cable fit?
Yes. The Starlink V5 uses the same Starlink plug as Gen 3 cables, so our 23m, 30m and 46m cables plug into the dish and into either port on this adapter.
Which Starlink does it suit?
The Starlink V5, and Starlink kits with the Router Mini or Router 4. These kits use a separate power supply box with two Starlink ports, which this adapter replaces.
Does it suit the Starlink Router 3?
No. Router 3 kits plug the power supply into the router, which powers the dish. For those, use our TVD-SL34 12V to 57V booster.
Can I run it from an Anderson plug?
Yes. The adapter has an XT60 input, so add our Anderson to XT60 adapter lead (TVDA31) and plug it into your Anderson outlet instead of using the cigarette plug lead.
Does it work on 24V?
Yes. The input is 12–24V DC, so it suits 12V and 24V systems.
What are the PoE switches for?
Each port has its own PoE ON/OFF switch. Leave them ON for the Starlink dish and router. Turn PoE OFF on the router port if you connect a third-party router, so it does not receive PoE power.
Is it a genuine Starlink product?
No. It is an aftermarket power adapter sold by 12 Volt Direct. Starlink is a trademark of Space Exploration Technologies Corp.
What's the warranty?
12 months against manufacturing faults. Contact our team if you have any trouble.
Not sure which one you need?
Contact our team with a photo of your router and power supply and we will check it for you.
Product Details
| SKU | TVD-SL77 |
| Brand | 12 Volt Direct |
(TVD-SL77)
12 Volt Direct was built around a simple idea: 12 V systems should be done properly. Its range is designed for the way Australians power their vehicles, caravans and campsites, and includes many vehicle and application-specific products, from Anderson adapter leads and power distribution to a dedi...
Find Out MoreBe The First To Review This Product!
Help other SPC Enterprises Pty Ltd users shop smarter by writing reviews for products you have purchased.
We Also Recommend
More From This Category